To create a rim decal kit that fits your wheels perfectly, please take a few simple measurements.
Required tools:
- A flexible measuring tape or tape
- A ruler
- A pen
- Your phone to take photos
1. Measure the rim diameter
Measure the diameter of the rim, not the tire.
If you know the size of your rim, please include it as well. This does not replace taking the actual measurement just in case.
2. Measure the width of the area to be decorated
This is the most important measurement. Place your tape measure on the part of the rim where the sticker will be placed and measure the width of the available surface, from one edge to the other.
Note the measurement in cm.
3. Measure the rim width
Measure the total width of the rim as well, if possible.
This measurement should be taken from the rim edge (contact area with the tire) to the start of the spokes or rim supports. If you use tape, do not hesitate to have it take the shape of the rim and then flatten it out to get the dimensions.
This measurement helps us better identify the shape and dimensions of your rim.
4. Verify the rim shape
Look to see if the surface where the kit will be placed is: flat, slightly rounded, domed, or recessed. A profile photo will also help us verify the shape.
5. Send photos
Please take:
1 photo of the entire rim
1 profile photo
1 close-up photo of the area to be decorated. If possible, a photo with the measuring tape on the rim to verify the measurement.
Example:
- Front rim
- Diameter: 43 cm
- Decal area width: 2.5 cm
- Rim width: 8.9 cm
- Rear rim Diameter: 43 cm
- Decal area width: 2.5 cm
- Rim width: 12.7 cm
- Motorcycle: Yamaha MT-07 Year: 2023
IMPORTANT Take each measurement twice to avoid errors. Always indicate the dimensions in centimeters (cm). The more precise the measurements and photos, the more perfectly your decal kit can be adjusted to your rims.
0 comments